· Rust free fiberglass construction and stainless steel hardware. · P-107 stainless steel locking system provides double locking. · Mounting plates accommodate a variety of 15-25-35 kV, 200-600A junctions. · The mounting plate allows for stand-offs or feed thru's to be installed. · Convex base shape and steps help prevent sidewall deflection when installed. · Open lid allows complete access from the top, front or sides of the cabinet. · Rotational lid rotates on pivot bolts creating a lower center of gravity that reduces the force required to open the cabinet. · The lid can be removed if desired. All that is required is the removal of two nuts on the inside of the cabinet and the lid comes off. · Cam or prop arms are not required to keep the lid open because weight of the lid holds itself open in windy conditions. · The wide open lid allows cable pulling equipment to be used inside of the cabinet with little interference. · Hot-stick operators have open access to elbows with no lid interference from the top, front, or sides. · One-piece design for quick installation, no bolting to ground sleeve. The ground sleeve is part of the cabinet for direct burial. · The cabinets four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.
