Nordic Fiberglass Inc. PO Box 27 Warren, MN 56762 Ph: 218-745-5095 Fx: 218-745-4990 E-mail: sales Comments
Made in the USA
Is your box pad or ground sleeve installed and the transformer or switch gear arriving later, or do you have permanent splicing vault needs?
If the answer is yes, we recommend our Nordic covers that are available for all of our box pads and ground sleeves. (Catalog Page)
Spray-Up covers are produced of fire retardant resin and a combination of chopped glass sprayup and hand layup using 18 oz woven roving glass reinforcement.
Our covers are fabricated with one or more layers of encapsulated plywood.
The covers come with penta-head bolts for fastening to the box pad.
The exterior is covered with a Munsell Green gel-coat, which contains UV stabilizer for superior weatherability.
For box pads that were not furnished with inserts, we can provide Stainless Steel floating-nut inserts.
The GSC-37-43 covers are produced by a process known as cold pressed molding. This process consists of a matched metal tool, forming the top and bottom portions of the GSC-37-43. These parts are hydraulically pressed together, however, before the mold is closed, it is heated. The pigmented fire retardant resin is poured into the bottom cavity of the metal tool. The pigmented resin contains UV stabilizers to provide superior weatherability and protection from ultraviolet light. Then the operator places a prepared package of glass and plywood in the cavity. More pigmented resin is poured on top. Finally the two solid metal blocks are pressed together and minutes later a new GSC-37-43 emerges.
Guideline for determining product size GSC-37-43-MG = GSC=Ground Sleeve Cover 37-43=37"W x 43"D MG=Munsell Green
